United Kingdom · Careers and retraining
Clinical engineer: how to become one, pay and hours
You can train as a clinical engineer through a degree and the NHS Scientist Training Programme, a degree apprenticeship or the Practitioner Training Programme. The job profile lists no pay or hours figure.
Updated 15 November 2026 from 1 official page.
Key facts
- A degree is one way to start training as a clinical engineer. Source: nationalcareers.service.gov.uk
- The NHS Scientist Training Programme lasts 3 years and pairs NHS employment with a postgraduate master's. Source: nationalcareers.service.gov.uk
- The Healthcare Science Practitioner Level 6 Degree Apprenticeship takes a minimum of 3 years. Source: nationalcareers.service.gov.uk
- People without a degree can apply for the NHS Practitioner Training Programme. Source: nationalcareers.service.gov.uk
- Clinical engineers need to register with the Health and Care Professions Council. Source: nationalcareers.service.gov.uk
- The role includes quality assurance checks on equipment. Source: nationalcareers.service.gov.uk
- Clinical engineers can work in an NHS or private hospital, a laboratory or a research facility. Source: nationalcareers.service.gov.uk
- With experience, you could move up to senior engineer and specialise in particular clinical areas. Source: nationalcareers.service.gov.uk
How do I get into clinical engineering?
The National Careers Service job profile lists three ways in: a university course, an apprenticeship, and an NHS training programme for non-graduates. Read the entry requirements for each one before you apply, because they differ.
With a degree in a subject such as biomedical engineering, engineering, pure or applied physics, applied maths or computer science, you can apply for the postgraduate NHS Scientist Training Programme (STP). It runs for 3 years and combines employment in the NHS with study for a postgraduate master's degree. It covers clinical measurement, rehabilitation engineering, and medical device risk management and governance.
The Healthcare Science Practitioner Level 6 Degree Apprenticeship takes a minimum of 3 years and mixes on-the-job training with study for a degree. If you do not have a degree, the NHS Practitioner Training Programme (PTP) is a 3-year programme where you are employed in the NHS and study for an accredited university degree in healthcare science (clinical engineering). You could also work as a clinical engineering technologist in the NHS and apply to join the PTP.
What qualifications do I need?
For a degree, you'll usually need 5 GCSEs at grades 9 to 4 (A* to C), or equivalent, including English, maths and science, plus 2 or 3 A levels, or equivalent, including a science. For postgraduate study you'll need a degree in a relevant subject.
For the degree apprenticeship, you'll usually need 4 or 5 GCSEs at grades 9 to 4 (A* to C) and A levels, or equivalent.
The PTP asks for 5 GCSE grades 9 to 4 (A* to C) including English language, maths and a science subject, and a minimum of 2 A levels, including maths or a science. Equivalent qualifications to A levels in science or engineering may be acceptable, for instance an extended diploma in applied science. You'll need to register with the Health and Care Professions Council.
What skills will I use as a clinical engineer?
You'll need knowledge of engineering science and technology, maths, and computer operating systems, hardware and software. The profile also lists design skills and knowledge, complex problem-solving skills, knowledge of biology and knowledge of physics.
Beyond the technical side, you'll need excellent verbal communication skills and the ability to use a computer and the main software packages confidently. The work puts you alongside other medical professionals and technical staff, so explaining equipment clearly matters.
You would be expected to have an understanding of how the NHS values would apply in your work. If you are moving across from another industry, that is the part to read up on first.
What does a clinical engineer do day to day?
The tasks run from building things to checking them. You could develop artificial limbs using advanced materials, or build and test medical aids like heart valves, hearing implants and speech synthesizers. You could design equipment that helps doctors use new techniques, for example optical instruments for keyhole surgery.
You could also manage medical equipment such as scanners, imaging machines and monitoring systems, and carry out quality assurance checks to make sure equipment is working correctly and safely. The role involves working closely with other medical professionals and technical staff.
You could work in an NHS or private hospital, in a laboratory or at a research facility.
What is the pay and what are the hours?
This guide uses the National Careers Service job profile, and it does not give a salary figure or weekly hours for clinical engineers. No amount is quoted here for that reason.
The profile does set out progression. With experience, you could become a senior engineer, specialising in particular clinical areas, or move into project management, medical research and development, or university teaching.
You could register for chartered engineer status (CEng), which recognises your experience and expertise, and this could help when applying for jobs as a consultant clinical engineer. You can also work in the private sector as a clinical engineer for commercial companies that develop new medical devices and instruments.
Step by step
- Match the routes to your qualifications. Compare the university, apprenticeship and NHS training programme routes against what you already hold. The profile sets out the GCSEs, A levels and degrees each one usually asks for.
- Get some hospital experience. There is a lot of competition for places on the STP, so it helps to have relevant experience. You could do some voluntary work in a hospital to get experience of patient contact.
- Apply for the Scientist Training Programme. Once you have a relevant degree, you can apply for the postgraduate NHS Scientist Training Programme. It runs for 3 years and combines employment in the NHS with study for a postgraduate master's degree.
- Apply for a degree apprenticeship. Look at the Healthcare Science Practitioner Level 6 Degree Apprenticeship, which takes a minimum of 3 years and mixes on-the-job training with degree study. You could then apply to take further training with the NHS to become a clinical engineer.
- Use the PTP if you have no degree. If you do not have a degree, you could apply for the NHS Practitioner Training Programme and study for an accredited degree while employed in the NHS.
- Search for courses and vacancies. The Find an apprenticeship service can help with your search, send alerts when new apprenticeships become available and has advice on how to apply. The Find a job service can help with your search for jobs.
- Plan your registration. You'll need to register with the Health and Care Professions Council, so build that into your plans alongside your training.
Watch out for
- There is a lot of competition for places on the STP, so relevant experience helps before you apply.
- The profile shows no apprenticeship vacancies in England for a clinical engineer, so use the Find an apprenticeship service to keep checking.
- Check the official job profile for pay and hours rather than assuming a figure, because it does not publish one.
Free tools for this
Questions people ask
Do I need a degree to become a clinical engineer?
Not necessarily. If you do not have a degree, you could apply for the NHS Practitioner Training Programme, a 3-year programme where you are employed in the NHS and study for an accredited degree. You could also start with a Healthcare Science Practitioner Level 6 Degree Apprenticeship.
How long does it take to train as a clinical engineer?
The NHS Scientist Training Programme takes 3 years and combines NHS employment with a postgraduate master's degree. The degree apprenticeship takes a minimum of 3 years, and the Practitioner Training Programme also runs for 3 years.
What GCSEs do I need to be a clinical engineer?
For a degree you'll usually need 5 GCSEs at grades 9 to 4 (A* to C), or equivalent, including English, maths and science, plus 2 or 3 A levels, or equivalent, including a science. The PTP asks for 5 GCSE grades 9 to 4 (A* to C) including English language, maths and a science subject.
Where do clinical engineers work?
You could work in an NHS or private hospital, in a laboratory or at a research facility. You can also work in the private sector for commercial companies that develop new medical devices and instruments.
Get every step in order, with reminders
A free WUUUH account turns guides like this into your own action plan for United Kingdom: what to do first, the deadlines that start when your job ends, and reminders before they pass.
Official sources
- Clinical engineer (nationalcareers.service.gov.uk, checked 14 November 2026)
This guide is written only from the official pages above and checked automatically against them: every quoted fact and every figure must appear in that text before the guide is published. Rules change, so the official page is the final word for your situation.
Guides by country: United States · Canada · United Kingdom
Get the first-week-after-layoff checklist
One email with the three things to do this week, then an occasional digest of deadlines, programs, and new tools. Unsubscribe in one click.
No spam, no selling your address. Members already get this in their dashboard.